A105 forged steel gate valve refers to a gate valve in which the valve body and all valve parts are made of forged A105 material.

Forged steel A105 gate valve is suitable for water, steam, oil, nitric acid, acetic acid, oxidizing medium, urea and oil pipelines. The forged steel A105 gate valve adopts a reduced diameter design. Compared with the cast steel gate valve of the same diameter, the flow rate is slightly smaller, but the pressure and temperature range it bears is higher than that of the cast steel valve, and the sealing performance is much better than that of the cast steel gate valve. The service life is longer, and the flow direction of the medium is not restricted like other gate valves.

The main features are as below:

1. The forged steel A105 gate valve has a compact structure and is very strong, suitable for high pressure and high temperature applications.

2. Forged steel A105 gate valve solid stellite 6 wedge plate to ensure low wear and long service life.

3. The forged steel A105 gate valve packing ring is pre-compressed by 4000psi high pressure and has complete sealing performance.

4. The fully guided wedge plate can reduce the wear of the valve seat surface.

5. Forged structure, resistant to high pressure and high temperature.

6. Various connection methods: flange, socket welding, thread.

Technical Details:

1. Diameter: DN15~50.

2. Applicable temperature: -200℃~+650℃.

3. Pressure: From ANSI150LB to 4500LB. From DIN PN16-PN420

4. Connection method: flange, thread, socket welding, butt welding.

5. Body material: A105

6. Valve plate material: A105, F316.

7. Stem material: F6, F316.